We offer custom made machines to meet customer requirements.

Machine structure: A solid design of the manufacturing structure, the head frame, tail frame, transverse components, drive motor, operating platform, etc., mounted on a common frame.

Spool size: according to customer requirements

Spool filling weight: according to customer requirements

Linear speed: according to customer requirements

Bobbin loading: pivot or cantilever shaft between head frame and stern frame.

Head rack: The head rack shaft with pivot and diving pulley is assembled on a sturdy housing with heavy duty bearings.

Tailstock: The tailstock shaft with shaft pin is assembled on a strong housing with heavy duty bearings.

Tailstock movement: Pneumatic operation, screw type with two cylinders or handle.

Loading/Unloading: We offer electric bobbin loading and unloading machines with AC gear motors.

Or: Use ramp loading and unloading.

Transverse unit: Transverse unit by rolling ring. The transverse spacing and length can be adjusted very fine. The transverse speed is automatically synchronized with the bobbin speed. Provide appropriate guidance components.

Lubrication: oil splash lubrication or grease lubrication

Brakes: Disc/electromagnetic brakes

Drive: Use suitable AC motor 3 phase 415 volts, 50 Hz.

Speed and tension control: The AC motor operates in speed control mode with encoder to ensure constant tension throughout the winding process. All fittings are supplied with suitable AC variable frequency drivers.

Dancer components: Both horizontal and vertical types of dancer components are available. 3+2 pulleys or 5+4 pulleys are provided. The bottom side slide wheel is mounted on a bracket with a linear bearing and a guide shaft. Cylinders and pressure regulators are provided for tension control. Linear potentiometers provide feedback and are integrated with AC variable frequency drivers.