Winding size:

Flange diameter: 300mm

Barrel diameter: 200mm

Width: 100mm

Aperture: 50mm

Winding speed: 300 m/min. Speed change

Wire size: 0.8mm 2mm

Spool load: between headstock and tailstock

Pin headstock: The headstock shaft with the pin and the diving pulley are assembled on a strong housing with bearings.

Tail seat: pneumatic or screw type

Transverse component: transverse unit with rolling ring. Transverse distance and stroke length can be adjusted very fine. The line guide assembly is mounted on a carrier with linear bearings and two guide shafts.

Length counter: electronic.

Driver: Driven by 2 HP AC motor. Variable frequency drive is provided for speed variation

Control Panel: A control panel with AC variable frequency driver is provided for speed control

Optional accessories:

Roller assembly: Consists of 2 sets of 4+ 3 rollers, mounted vertically and horizontally with locking system. The roller can be adjusted separately.